STUDIO SUPPLIES / THE GINGERBREAD MOUSE

Little project.
Right supplies.

The things behind the make.

Here are the supplies from my gingerbread mouse straw-topper project, plus a few notes to help you choose the right ones for your setup.

Shop the project list on Amazon

THE SETUP I USED

Creator 5 Pro.
0.4 mm nozzle.

I made the successful test print on my Flashforge Creator 5 Pro, using Orca-Flashforge and a 0.4 mm nozzle. The project balances print time with a smooth-looking silk finish; your results will depend on your machine, material and settings.

A note about the shopping list: the Amazon post also includes an AD5X printer. That is a different machine, not the printer used for this test. You do not need to buy an AD5X to follow this project.

THE MATERIALS

On the workbench.

THE STRAW

ALINK clear reusable straws

The exact straw listing supplied for this project: ALINK’s 12-pack of 13-inch clear reusable plastic straws with a cleaning brush.

The 13-inch measurement is the length, not the outside diameter. Do not substitute another straw solely because its length matches; check the actual fit without forcing it.

View the ALINK straws on Amazon

THE HOLOGRAPHIC FINISH

Wefuit H2H build plate

The Starry & Flake spring-steel plate listing for the Creator 5 / Creator 5 Pro. This is the patterned plate used for the project’s build-plate-facing surface.

Check the listing’s machine compatibility and follow the plate maker’s preparation instructions. A plate listed for this machine is not a recommendation for every printer.

View the build plate on Amazon

THE ACCENT COLORS

Colourbing silk PLA+ bundle

The supplied 1.75 mm silk PLA+ bundle lists red, green, white and skin tone, with four 250 g spools. Choose the colors you want in the slicer; you do not have to use every color in the bundle.

Silk colors and sheen can look different between screens, lighting and batches. Start with the filament maker’s guidance and tune for your own machine.

View the silk color bundle on Amazon

THE COOKIE COLOR

ELEGOO copper silk PLA

The supplied copper filament is ELEGOO’s 1.75 mm silk PLA, 1 kg listing. It provides the warm, shiny cookie-color option for this project.

Select the copper variant when checking out. Switching to matte PLA or another material changes the look and may require different temperature, flow and support settings.

View the copper filament on Amazon

A FEW LITTLE PRINT NOTES

Before you press print.

  • Keep the fit: leave the model at 100% scale so the thread and straw opening are not resized.
  • Choose your finish: the successful setup used a 0.4 mm nozzle. Finer 0.4 mm layers and a supported 0.2 mm nozzle are options to test, not physically validated studio presets.
  • Check the bottle: a 20 oz label alone does not establish matching neck threads. Check your exact bottle gently; do not force it or assume a pressure-tight seal.
  • Make it safely: remove supports carefully and inspect the print. Food-contact, dishwasher and toy safety are not certified.

This is a supplies reference, not the design download or a universal printer profile. Product variants and availability can change; verify the details on Amazon before buying.